Semicera's 6 Inch Semi-Insulating HPSI SiC Wafers are designed to meet the rigorous demands of modern semiconductor technology. With exceptional purity and consistency, these wafers serve as a reliable foundation for developing high-efficiency electronic components.
These HPSI SiC wafers are known for their outstanding thermal conductivity and electrical insulation, which are critical for optimizing the performance of power devices and high-frequency circuits. The semi-insulating properties help in minimizing electrical interference and maximizing device efficiency.
The high-quality manufacturing process employed by Semicera ensures that each wafer has uniform thickness and minimal surface defects. This precision is essential for advanced applications such as radio frequency devices, power inverters, and LED systems, where performance and durability are key factors.
By leveraging state-of-the-art production techniques, Semicera provides wafers that not only meet but exceed industry standards. The 6-inch size offers flexibility in scaling up production, catering to both research and commercial applications in the semiconductor sector.
Choosing Semicera’s 6 Inch Semi-Insulating HPSI SiC Wafers means investing in a product that delivers consistent quality and performance. These wafers are part of Semicera’s commitment to advancing the capabilities of semiconductor technology through innovative materials and meticulous craftsmanship.
Items |
Production |
Research |
Dummy |
Crystal Parameters |
|||
Polytype |
4H |
||
Surface orientation error |
<11-20 >4±0.15° |
||
Electrical Parameters |
|||
Dopant |
n-type Nitrogen |
||
Resistivity |
0.015-0.025ohm·cm |
||
Mechanical Parameters |
|||
Diameter |
150.0±0.2mm |
||
Thickness |
350±25 μm |
||
Primary flat orientation |
[1-100]±5° |
||
Primary flat length |
47.5±1.5mm |
||
Secondary flat |
None |
||
TTV |
≤5 μm |
≤10 μm |
≤15 μm |
LTV |
≤3 μm(5mm*5mm) |
≤5 μm(5mm*5mm) |
≤10 μm(5mm*5mm) |
Bow |
-15μm ~ 15μm |
-35μm ~ 35μm |
-45μm ~ 45μm |
Warp |
≤35 μm |
≤45 μm |
≤55 μm |
Front(Si-face) roughness(AFM) |
Ra≤0.2nm (5μm*5μm) |
||
Structure |
|||
Micropipe density |
<1 ea/cm2 |
<10 ea/cm2 |
<15 ea/cm2 |
Metal impurities |
≤5E10atoms/cm2 |
NA |
|
BPD |
≤1500 ea/cm2 |
≤3000 ea/cm2 |
NA |
TSD |
≤500 ea/cm2 |
≤1000 ea/cm2 |
NA |
Front Quality |
|||
Front |
Si |
||
Surface finish |
Si-face CMP |
||
Particles |
≤60ea/wafer (size≥0.3μm) |
NA |
|
Scratches |
≤5ea/mm. Cumulative length ≤Diameter |
Cumulative length≤2*Diameter |
NA |
Orange peel/pits/stains/striations/ cracks/contamination |
None |
NA |
|
Edge chips/indents/fracture/hex plates |
None |
||
Polytype areas |
None |
Cumulative area≤20% |
Cumulative area≤30% |
Front laser marking |
None |
||
Back Quality |
|||
Back finish |
C-face CMP |
||
Scratches |
≤5ea/mm,Cumulative length≤2*Diameter |
NA |
|
Back defects (edge chips/indents) |
None |
||
Back roughness |
Ra≤0.2nm (5μm*5μm) |
||
Back laser marking |
1 mm (from top edge) |
||
Edge |
|||
Edge |
Chamfer |
||
Packaging |
|||
Packaging |
Epi-ready with vacuum packaging Multi-wafer cassette packaging |
||
*Notes: "NA" means no request Items not mentioned may refer to SEMI-STD. |